As a tool for repairing pipelines, high pressure pipe repair clamp has installation methods and steps, but in many cases, in order to repair faster, it is easy to omit some steps, resulting in bad conditions. How to do it? Let's find out together!

1. Identify the outer diameter of the pipe, and then select the corresponding type of joint. Don't choose the wrong one.
2. Eliminate burrs, sharp corners and debris at the end of the pipe, the high pressure pipe repair clamp manufacturer tells you that the purpose is to seal that there are no foreign objects under the rubber ring and on the steel pipe.
3. Mark the ends of both tubes so that the tube connector is in the center. After stabbing the product into one end of the pipe, align the ends of the two pipes and move the connector to the center of the two pipes.
4. Adjust the pipe connector, and then use a hexagonal wrench to evenly tighten the bolts of DN150 and above. After tightening the bolts, tap the inside of both sides of the pipe connector with a mallet to make the gap with the pipe even, and then tighten the bolts to achieve a sealing effect.
The above is the treatment method of high pressure pipe repair clamp in bad condition. When there is a bad condition, it is necessary to check the pipeline and high pressure pipe repair clamp, and then repair and maintain according to the steps. Friends in need are welcome to contact our company!