Pipe clamp straub material characteristics: density, bending strength, impact toughness, compression strength, elastic modulus, tensile strength, temperature resistance, color.

Pipe clamp straub installer:
Before assembling on the welding board, in order to determine the direction of the clamp, it is recommended to mark the fixing place first, then weld it, insert the lower part of the pipe clamp straub body, and put the pipe to be fixed. Put on the other half of the pipe clamp straub body and cover, and tighten them with screws. Never directly weld the bottom plate with pipe clamp straub installed.
On the ground rail, the rail can be welded to the foundation or fixed with screws. Then push the rail nut into the rail and turn it 90 degrees, insert the lower half of the pipe clamp straub body into the nut, and put the pipe to be fixed, and then Put on the upper half of the pipe clamp straub body and cover, and fix it with screws.
Stacked assembly, the guide rail can be welded on the foundation, or fixed with screws, first install the upper and lower half of the pipe clamp straub body, put the pipe to be fixed, and then put the upper half of the pipe clamp straub body, fix it with screws, and prevent loosening The cover prevents it from turning. Then install the second pipe clamp straub, the method is the same as above.
When assembling the elbow, it should be directly fixed with Yongsheng pipe clamp straub at the front and rear of the elbow. It is recommended that such a support point should be a fixed position.