The stainless steel couplings manufacturer tells you that although the pipe connection is easy to install, it must be carefully operated according to the instructions, otherwise it will cause the pipe to leak, or even explode if it is serious. The following stainless steel couplings manufacturers will tell you what problems will occur during the installation process.

1. When installing, do not draw a line on the pipe end first.
Line drawing is a very important step in the installation of stainless steel couplings. It can help us avoid tilting of the pipe during the installation process. At the same time, it can accurately lock the connection part so that the inner rubber ring can completely cover both ends of the pipe.
2. There is a problem with the outer diameter of the tube
Often when we choose stainless steel couplings, we refer to the nominal diameter DN for purchase. One size of DN corresponds to the outer diameter of two large and small pipes. To determine which pipe outer diameter we need, the manufacturer of stainless steel couplings will tell you if If the outer diameter of the pipe is not aligned, the pipe and the connector cannot be closely connected, which will cause problems such as pipe disconnection and leakage.
3. Install without the torque in the installation instructions
The stainless steel couplings manufacturer tells you that we must refer to the torque in the manual when twisting the bolts. If the torque is not reached, the pipe connection will not be tight enough. If the torque is too large, the bolt will trip. Both methods will cause the pipe. There is a problem with the connection.