Many people don’t know what to pay attention to when installing pipe coupling straub grip? The following pipe coupling straub grip manufacturers will show you all about it.

1. First, confirm the outer diameter of the pipe, select the corresponding type of connector, and don't choose the wrong one.
2. Remove burrs, sharp corners and debris from the pipe end to ensure that there is no foreign matter under the sealing rubber ring and on the steel pipe.
3. Mark the ends of the two pipes so that the pipe coupling straub grip is in the middle position. After inserting the product into one end of the pipe, align the two pipe ends, and then move the connector to the middle of the two pipes.
4. Adjust the pipe coupling straub grip, and then use an Allen wrench to evenly tighten the bolts of products above DN150. After the bolts are tightened, use a mallet to hit the inner sides of the connector on both sides to make it evenly spaced with the pipe, and then again Tighten the bolts to achieve a good sealing effect.
Convenient maintenance: When repairing the pipeline, even if there is oil and water in the pipeline, it does not need to be welded and does not need to be heated, and there is no risk of fire or explosion. The use of dual-card, open, and foldable repairers can be used to recover from various damages. The outside of the pipeline is repaired by bandaging.
The pipe coupling straub grip can be connected to pipes of different materials. The pipe coupling straub grip is made of stainless steel shell and has a longer service life. It is used in water, gas, petroleum, chemical, thermal, ship and other industries.